EIE Industrial Products Sdn Bhd
16, Jalan TS 6/9,
Taman Industri Subang,
47510 Subang Jaya,
Selangor, Malaysia.
+603-5637 1616
+603-5635 9833

High Impact Crusher Backing (HICB)

High Impact Crusher Backing (HICB) Megapoxy

Download Files

HICB.pdf (237.22 KB)
Megapoxy High Impact Crusher Backing is a two component pourable epoxy grout suitable for:
  • Backing Crusher Parts
  • Grouting Machinery
  • Locking Bearings
  • Setting Anchor Bolts
  • Chocking of Machinery


Part “A” is a white low viscosity liquid and is packed in a re-sealable plastic bucket.
Part “B” is a blue coloured liquid and is packed in a screw capped plastic bottle.
Accelerator is a clear brown liquid and is packed in a 250 ml. tin.

Method of Use
  1. Seal all crevices with putty (such as Megapoxy PF Rapid set putty) so that backing mixture does not leak out.
  2. Make certain no settling has occurred in the resin by stirring, then add the hardener (Part “B”) slowly with continual mixing.
  3. Using low speed electric drill, mix well, but do not aerate.
  4. Mix until uniform colour is obtained.
  5. The mixture must be used immediately after mixing.
  6. If ambient temperature is high, the kits should be stored in as cool a place as possible. High ambients will lead to greatly shortened usable life.
  7. If topping up is required, then this can be carried out at a later date when it is convenient.
  8. If adhesion is not required, one or both surfaces should be coated with wax or grease based release agent.
  9. Allow Megapoxy HICB to harden before returning crusher into service.

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
*only support gif, jpeg, jpg, png, pdf

Switch to Mobile Version